Metric Halo Discussion Forum
The place to talk MH!

Home   Search      Help    Register    Login
Home » Hardware » MIOConsole » logic pro x. only stereo output works (1 and 2) (using multiple outputs)
logic pro x. only stereo output works (1 and 2) [message #86662] Mon, 26 February 2018 03:58 Go to next message
castro is currently offline  castro
Messages: 4
Registered: February 2018
Location: sydney
Junior Member
Hi.

I recently purchased a metric halo 2882 dsp+. Great unit but can't work out how to assign outputs. previous interface i would just select in logic. Please see pic. what am i doing wrong?
  • Attachment: 2882.tiff
    (Size: 306.54KB, Downloaded 1121 times)
Re: logic pro x. only stereo output works (1 and 2) [message #86663 is a reply to message #86662] Mon, 26 February 2018 04:17 Go to previous messageGo to next message
castro is currently offline  castro
Messages: 4
Registered: February 2018
Location: sydney
Junior Member
Sorry. Worked out don't know how to delete :-0

found another topic that had guidance.

thank you
Re: logic pro x. only stereo output works (1 and 2) [message #86664 is a reply to message #86662] Mon, 26 February 2018 04:30 Go to previous messageGo to next message
bj is currently offline  bj
Messages: 434
Registered: July 2011
Senior Member
The outputs from the computer are the DAW channels in the MIO Mixer.

If you want them to go directly out to the outputs, then go to the DAW strips in the default setup and set the direct outs for those to the Analog Outputs you would like to use...
Re: logic pro x. only stereo output works (1 and 2) [message #86665 is a reply to message #86664] Tue, 27 February 2018 02:58 Go to previous messageGo to next message
castro is currently offline  castro
Messages: 4
Registered: February 2018
Location: sydney
Junior Member
thanks. but now when i try and record through 3 and 4 it records the output of that channel
Re: logic pro x. only stereo output works (1 and 2) [message #86666 is a reply to message #86665] Tue, 27 February 2018 14:09 Go to previous messageGo to next message
bj is currently offline  bj
Messages: 434
Registered: July 2011
Senior Member
The FW channels in MIO Console correspond to the inputs into logic; set the direct outs on the channels you want to record to FW x ; these will appear as Input x in Logic. So if you have FW 3 as the direct out on your DAW 3 strip in MIO Console that's what you will get back in Logic. Just make sure that the FW channels are set on your analog (or digital) input strips in MIO Console.

If you need further help with this, please get in touch with support...
Re: logic pro x. only stereo output works (1 and 2) [message #86667 is a reply to message #86666] Wed, 28 February 2018 03:35 Go to previous messageGo to next message
castro is currently offline  castro
Messages: 4
Registered: February 2018
Location: sydney
Junior Member
thank you
Re: logic pro x. only stereo output works (1 and 2) [message #87435 is a reply to message #86662] Wed, 18 December 2019 12:00 Go to previous messageGo to next message
PeriRigos is currently offline  PeriRigos
Messages: 1
Registered: December 2019
Junior Member
Hi...I restarted with Firestudio turned off and it forced my computer now to send internal audio to my HDMi output into my monitor ( big screen smart tv ) I now have sound through that avenue, but when I turn on my studio live board and select at the Mac Apple prefs of Presonus it cancels everything and I then have no sound from the computer.
Re: logic pro x. only stereo output works (1 and 2) [message #87436 is a reply to message #87435] Wed, 18 December 2019 12:29 Go to previous message
bj is currently offline  bj
Messages: 434
Registered: July 2011
Senior Member
PeriRigos - I don't think this is the correct forum for your post. This forum is specific for Metric Halo interfaces.
Previous Topic: Do i need a firmware update
Next Topic: Surround format (5.1) supported in 3d ?
Goto Forum:
  

[ PDF ]

Current Time: Mon Oct 26 00:44:07 EDT 2020