Metric Halo Discussion Forum
The place to talk MH!
Home   Search      Help    Register    Login
Home » Hardware » MIOConsole » Master/slave setting question (Master/slave settings in mio and logic)
Master/slave setting question [message #85764] Mon, 20 May 2013 05:00 Go to next message
quicksandjezus is currently offline  quicksandjezus
Messages: 14
Registered: September 2012
Location: The Netherlands
Junior Member
He guys & girls,

I was wondering this thing; with two ULN 8's connected, one as master and one as slave, things seem to work fine with Logic so far.
But now I'm diving deeper into some Logic advanced stuff, I'm would like to know what should be the setting in Logic ?
So far I discovered that Logic is still on internal syncing, so it is a master too, isn't it ?
Should I set logic to internal, manual or auto enable external sync ?
Not working with aggregate devices, but connected via firewire and a digital aes cable only.

Report message to a moderator

Re: Master/slave setting question [message #85765 is a reply to message #85764] Mon, 20 May 2013 06:04 Go to previous messageGo to next message
wango is currently offline  wango
Messages: 18
Registered: November 2012
Location: France
Junior Member
These settings are related to syncing Logic to or from an external machine or software by sending or receiving timecode (TC or MTC)
To sync the audio from the 2 ULN8s, make the appropriate settings under Preferences/Audio and Settings/Audio and Audio/Midi Setup (AMS).
Check that the ULN8 master device followed correctly these settings and slave the 2nd ULN8 to the master device using WC or AES within the console or AMS.
Hth

Ab

Report message to a moderator

Re: Master/slave setting question [message #85766 is a reply to message #85765] Mon, 20 May 2013 07:51 Go to previous message
quicksandjezus is currently offline  quicksandjezus
Messages: 14
Registered: September 2012
Location: The Netherlands
Junior Member
Right, thank you Ab, I'll change nothing than, because it is properly set now.

Report message to a moderator

Previous Topic: separate headphone cue/monitor mute(???)
Next Topic: Output 1&2 of a slaved box usable ?
Goto Forum:
  

[ PDF ]

Current Time: Wed Mar 29 08:57:36 EDT 2023