Metric Halo Discussion Forum
The place to talk MH!

Home   Search      Help    Register    Login
Home » Hardware » MIOConsole » 2882 2d - Surround Monitor path not working
2882 2d - Surround Monitor path not working [message #86849] Tue, 06 November 2018 06:13 Go to next message
MatthieuTibi is currently offline  MatthieuTibi
Messages: 40
Registered: July 2017
Location: Paris
Member
Hello,

I'd like to add rear speakers to my configuration, but I can't get it working using the Monitor Control

If for exemple I create :

- a Stereo Monitor Path to Analog Outputs 1-2, it works
- a Stereo Monitor Path to Analog Outputs 3-4, it works

and I can see modulation in the MIO console window, and I can hear it on my speakers.

BUT if I create what I need, a Quad Monitor Path to Analog Outputs 1-2-3-4, it doesn't work.

And I can't see any modulation on the MIO console...

It doesn't come from the Monitor Source, as I've tested all that with the same stereo bus source.
That same stereo source WORKS with a Stereo Monitor Path, but not with a Quad Monitor Path.

What's the problem ?
Did I do something wrong ?
Is there a bug somewhere ?

Thanks,
Matthieu
Re: 2882 2d - Surround Monitor path not working [message #86850 is a reply to message #86849] Tue, 06 November 2018 06:25 Go to previous messageGo to next message
MatthieuTibi is currently offline  MatthieuTibi
Messages: 40
Registered: July 2017
Location: Paris
Member
Some screenshots if it helps to understand the problem...
Thanks
Re: 2882 2d - Surround Monitor path not working [message #86851 is a reply to message #86849] Tue, 06 November 2018 11:44 Go to previous messageGo to next message
jon is currently offline  jon
Messages: 37
Registered: November 2012
Member
If you are running the current version of MIO Console, it is possible you are running into problem due to a bug that was introduced when the Mono button was added.

Try rolling back to this earlier version of MIO Console:

http://www.mhsecure.com/mio/MIOConsole_v.5.6.06.218.zip

I hope this is helpful.


Jon Stern
Metric Halo Support
Re: 2882 2d - Surround Monitor path not working [message #86852 is a reply to message #86851] Tue, 06 November 2018 11:50 Go to previous messageGo to next message
MatthieuTibi is currently offline  MatthieuTibi
Messages: 40
Registered: July 2017
Location: Paris
Member
Hello,

OK thanks...

Do I have to downgrade the firmware too ?
Re: 2882 2d - Surround Monitor path not working [message #86853 is a reply to message #86852] Tue, 06 November 2018 13:43 Go to previous messageGo to next message
MatthieuTibi is currently offline  MatthieuTibi
Messages: 40
Registered: July 2017
Location: Paris
Member
So I did a few test and it doesn't work...

The driver doesn't work with my OS (10.12)
(The 2882 doesn't appear in the audio peripherals)

And I tried the old MIO Console 5 application with the recent driver, and it's not compatible (errors, shutdown...)

So I you have another solution it would be helpful...

Thanks,
Matthieu
Re: 2882 2d - Surround Monitor path not working [message #86854 is a reply to message #86853] Tue, 06 November 2018 15:26 Go to previous messageGo to next message
MatthieuTibi is currently offline  MatthieuTibi
Messages: 40
Registered: July 2017
Location: Paris
Member
Hello,

Finally after several reboots and reinstall, it seems to work...
with the new driver and the old MIO console 5 app

OK I'll let you know !
Thanks
Re: 2882 2d - Surround Monitor path not working [message #86855 is a reply to message #86854] Wed, 07 November 2018 07:19 Go to previous messageGo to next message
MatthieuTibi is currently offline  MatthieuTibi
Messages: 40
Registered: July 2017
Location: Paris
Member
Hello,

I confirm this workaround works, so thank you Jon !

However it would be nice to correct the last version of the Mio console...

Thanks,
Matthieu

Re: 2882 2d - Surround Monitor path not working [message #87381 is a reply to message #86855] Wed, 30 October 2019 05:37 Go to previous message
MatthieuTibi is currently offline  MatthieuTibi
Messages: 40
Registered: July 2017
Location: Paris
Member
Hello,

One year after.... Smile

Is this bug corrected ?

May I upgrade to the last version of the driver ?
(2882 2d)

Thanks !

[Updated on: Wed, 30 October 2019 05:37]

Report message to a moderator

Previous Topic: Auto changing of sample rate
Next Topic: Metric Halo Console 3d Issue?
Goto Forum:
  

[ PDF ]

Current Time: Sat Apr 04 17:10:17 EDT 2020