| MIO Console Stops working Avid Eucon 19.5 and 19.51 [message #87244] |
Thu, 25 July 2019 00:25  |
djmichaelwenz
Messages: 18
Registered: July 2019
Location: Milwaukee, WI
|
Junior Member |
|
|
I mainly use my Avid Artist Mix for controlling MIO console. It is a fantastic way to control all my Ins and outs as I have multiple converters. Works absolutely wonderful I might add. So my artist mix is used as a way to control whatever I want to monitor. It is the software that is the brains behind my soundcard.
In version 18.3 My Artist Mix works well with the latest version of MIO console. Since 19.5 and 19.51 there has been no connection to MIO Console with my Artist Mix. Not a big deal. I rolled it back to 18.3 and the controller went back to working just fine and I didn't think to even check to update it as it did what it needed to.
Now here is my problem... I am doing a very large video project that spans three DVD's and 15 hours in Final Cut Pro. I created a great Eucon key command using my iPad to create DVD markers with one tap. I have to create about 250 DVD markers so this is the best time saver I had found. It is the only thing I use my iPad for.
My iPad must have updated PT control as I had gotten a warning on my mac that "PT Control and Eucon were Incompatible". So I went ahead and installed 19.51 and the iPad connected as suspected but MIO Console stops working.
I have unchecked and re-checked to use Eucon in MIO Console in the MIO prefs and it does not connect. As soon as I roll back to Eucon 18.3 I will get my monitor controller back.
So am I to have to uninstall and reinstall every time I have to marker a DVD project????
|
|
|
|
|
|
| Re: MIO Console Stops working Avid Eucon 19.5 and 19.51 [message #87246 is a reply to message #87245] |
Thu, 25 July 2019 13:52  |
djmichaelwenz
Messages: 18
Registered: July 2019
Location: Milwaukee, WI
|
Junior Member |
|
|
Thank you for your reply. After I was done markering the DVD's I went back to 18.3 and worked perfectly as it had been for a long time. Using Eucon to control MIO console is literally the best thing ever.
I am on 2D still. One guy on the Avid Forum suggested checking my firmware on my Artist Mix. I am going to do that when I get home and report back.
[Updated on: Thu, 25 July 2019 13:53] Report message to a moderator |
|
|
|
|
|
|
|
|
|
|
|
| Re: MIO Console Stops working Avid Eucon 19.5 and 19.51 [message #87459 is a reply to message #87458] |
Wed, 01 January 2020 19:09 |
bj
Messages: 638
Registered: July 2011
|
Senior Member
Administrator |
|
|
No.
If you need Catalina compatibility, then you have a need for 3d. We had to do a complete rewrite to support Apples 64-bit APIs. That rewrite is part of the 3d upgrade. Since Apple has removed their 32 bit APIs from Catalina, 2d an legacy boxes only run on Mojave and lower. But all of the units are upgradeable to 3d, so they are all supported on Catalina and forward, with the upgrade.
As I said earlier in the thread, I have tested the current version of EuCon with MIOConsole3d and it works as expected.
|
|
|
|
Home
Search
Help
Register
Login
]