Metric Halo Discussion Forum
The place to talk MH!

Home   Search      Help    Register    Login
Home » Hardware » MIOConsole » analog 1/2 direct output on 2882 3D
analog 1/2 direct output on 2882 3D [message #88281] Tue, 31 May 2022 13:47 Go to next message
greg sextro is currently offline  greg sextro
Messages: 2
Registered: December 2021
Junior Member
UPDATE - just figured this out. Not sure how to delete this post...

[Updated on: Tue, 31 May 2022 13:52]

Report message to a moderator

Re: analog 1/2 direct output on 2882 3D [message #88282 is a reply to message #88281] Tue, 31 May 2022 14:21 Go to previous message
bj is currently offline  bj
Messages: 614
Registered: July 2011
Senior Member
it is because they are are already assigned to the main monitor out in the monitor controller. You can unassigned them in the Mon Out path, or you can delete the Mon Out path; either will release them and make them available for assignment in the mixer.

Please note that by default Analog 1+2 are set to Monitor output level (about -30 dB relative to Line +4); if you will be using these for line out, you should make sure that you set the output levels to Line+4 in the Analog I/O control pane.
Previous Topic: Distorted sound via MHLink driver, no distortion via native soundboard
Next Topic: Naming Host i/o
Goto Forum:

[ PDF ]

Current Time: Tue Mar 28 03:54:39 EDT 2023