Metric Halo Discussion Forum: MIOConsole

Home

Help

Home » Hardware » MIOConsole » Group Buses broken

Show: Today's Messages :: Show Polls :: Message Navigator

Group Buses broken [message #88381]

Tue, 08 November 2022 07:27

henningaround
Messages: 27
Registered: January 2022
Location: Cologne

Junior Member

Mixer is set up to recieve 8x 5.1 Inputs from Host (Ethernet). They are routed to the 5.1 SUM Bus and the via AES/EBU 1-6 to the speakers.
As soon as I send those inputs to individual group buses, save the session and reopen it, nothing is going to the speakers anymore. And also nothing is going to the meter bridge which is feeded by a Cue Output (source is same as Monitor Controller).

Report message to a moderator

Re: Group Buses broken [message #88383 is a reply to message #88381]

Tue, 08 November 2022 13:16

bj
Messages: 615
Registered: July 2011

Senior Member
Administrator

Can you provide the .cnsl3d file? It might be best to reproduce the problem and file a bug (as that will give us the .cnsl3d file and logs) or open a support ticket so we can figure out what is going on. BTW, was this something that was working before and newly broken with 6.1.02, or had you not tried this before?

Report message to a moderator

Re: Group Buses broken [message #88387 is a reply to message #88383]

Wed, 09 November 2022 08:30

henningaround
Messages: 27
Registered: January 2022
Location: Cologne

Junior Member

I already did that twice. Did you recieve the bug reports?

Report message to a moderator

Re: Group Buses broken [message #88388 is a reply to message #88387]

Wed, 09 November 2022 13:26

bj
Messages: 615
Registered: July 2011

Senior Member
Administrator

Yes. I am looking at them. I'll get back with you directly.

Report message to a moderator

Re: Group Buses broken [message #88402 is a reply to message #88381]

Thu, 17 November 2022 03:24

henningaround
Messages: 27
Registered: January 2022
Location: Cologne

Junior Member

It's been a week now. Any solution?
The AUXES and GROUPS are "more" broken then I thought. When I create new 5.1 GROUPS in addition to the 5.1 SUM Bus anything from my macOS gets routed to the group and I cannot do anything about it. Also it gets routed to EVERY channel - not just LEFT and RIGHT although I'm only playing back Stereo Music in iTunes for example.
Same goes with AUXES.
Both features are totaly unusable. This is really a broken mixer!

Also anything i send out of Pro Tools on channels 87+ is coming in in the mixer totally messed up.

Report message to a moderator

Re: Group Buses broken [message #88404 is a reply to message #88402]

Sun, 20 November 2022 10:04

henningaround
Messages: 27
Registered: January 2022
Location: Cologne

Junior Member

I managed to record a video of what is happening when I'm assigning new group busses. It's totaly messed up. What's going on? Am I doing something completely wrong?
In this screen recording you can see what's hapening. Even the group meters inside MIO are broken.
Upper left corner you can see remote of a mac mini i'm using for metering what comes out of the Monitor Controller. SUM and group 1 seem to be ok, group 2 starts to fall into pieces and groups 3+ do not give anything to my meters or speakers.
I'm sending out lots of 1kHz tones from Pro Tools.

Oh now I see I cannot sent the link to the video unless I have posted 300+ messages. I'll send the link via e-mail.

Report message to a moderator

Re: Group Buses broken [message #88405 is a reply to message #88404]

Sun, 20 November 2022 10:07

henningaround
Messages: 27
Registered: January 2022
Location: Cologne

Junior Member

Can you please confirm that you have received this message?

I have not received any more replies so far, although there was talk of "directly".

Report message to a moderator

Re: Group Buses broken [message #88406 is a reply to message #88405]

Sun, 20 November 2022 23:01

bj
Messages: 615
Registered: July 2011

Senior Member
Administrator

Yes. I am seeing them. Sorry that I have not been able to address this yet. Please send the link for the video to support or put the URL in a message on this thread without the http part.

If you need immediate support please open a support ticket https://mhsecure.com/support

Our support team may or may not be able to help depending on whether this is a bug (probably can't help, but might be able to provide a work-around) or not. In any case, they can help with gathering info.

But as soon as I can repro the problem I will send you an email directly.

Report message to a moderator