|
Forum: MIOConsole
|
|
Topic: Master/slave setting question
|
| Master/slave setting question [message #85764] |
Mon, 20 May 2013 05:00 |
quicksandjezus
Messages: 7
Registered: September 2012
Location: The Netherlands
|
Junior Member |
|
|
He guys & girls,
I was wondering this thing; with two ULN 8's connected, one as master and one as slave, things seem to work fine with Logic so far.
But now I'm diving deeper into some Logic advanced stuff, I'm would like to know what should be the setting in Logic ?
So far I discovered that Logic is still on internal syncing, so it is a master too, isn't it ?
Should I set logic to internal, manual or auto enable external sync ?
Not working with aggregate devices, but connected via firewire and a digital aes cable only.
|
|
|
|
| Re: Master/slave setting question [message #85765 is a reply to message #85764] |
Mon, 20 May 2013 06:04 |
wango
Messages: 2
Registered: November 2012
|
Junior Member |
|
|
These settings are related to syncing Logic to or from an external machine or software by sending or receiving timecode (TC or MTC)
To sync the audio from the 2 ULN8s, make the appropriate settings under Preferences/Audio and Settings/Audio and Audio/Midi Setup (AMS).
Check that the ULN8 master device followed correctly these settings and slave the 2nd ULN8 to the master device using WC or AES within the console or AMS.
Hth
Ab
|
|
|
|
|
|
Home
Members
Search
Help
Register
Login
