Metric Halo Discussion Forum: MIOConsole

Home

Help

Home » Hardware » MIOConsole » Group Buses broken

Show: Today's Messages :: Show Polls :: Message Navigator

Group Buses broken [message #88381]

Tue, 08 November 2022 07:27

henningaround
Messages: 27
Registered: January 2022
Location: Cologne

Junior Member

Mixer is set up to recieve 8x 5.1 Inputs from Host (Ethernet). They are routed to the 5.1 SUM Bus and the via AES/EBU 1-6 to the speakers.
As soon as I send those inputs to individual group buses, save the session and reopen it, nothing is going to the speakers anymore. And also nothing is going to the meter bridge which is feeded by a Cue Output (source is same as Monitor Controller).

Report message to a moderator

[Message index]

		Group Buses broken By: henningaround on Tue, 08 November 2022 07:27
		Re: Group Buses broken By: bj on Tue, 08 November 2022 13:16
		Re: Group Buses broken By: henningaround on Wed, 09 November 2022 08:30
		Re: Group Buses broken By: bj on Wed, 09 November 2022 13:26
		Re: Group Buses broken By: henningaround on Thu, 17 November 2022 03:24
		Re: Group Buses broken By: henningaround on Sun, 20 November 2022 10:04
		Re: Group Buses broken By: henningaround on Sun, 20 November 2022 10:07
		Re: Group Buses broken By: bj on Sun, 20 November 2022 23:01
		Re: Group Buses broken By: henningaround on Mon, 21 November 2022 03:06
		Re: Group Buses broken By: bj on Mon, 21 November 2022 03:11
		Re: Group Buses broken By: henningaround on Mon, 21 November 2022 04:23
		Re: Group Buses broken By: bj on Mon, 21 November 2022 06:36
		Re: Group Buses broken By: henningaround on Fri, 27 January 2023 05:06
		Re: Group Buses broken By: bj on Fri, 27 January 2023 13:48

Previous Topic:	way to connect mh interfaces with the macbooks
Next Topic:	Guide Setting up 2 x 2882 - 1 Master (FW), and 1 slave (ADAT)

Goto Forum:

-=] Back to Top [=-

[

]

Current Time: Sun Apr 02 02:41:25 EDT 2023