Metric Halo Discussion Forum: Interfaces » I think my fw 800 port maybe fried

Home

Help

Home » Hardware » Interfaces » I think my fw 800 port maybe fried (I think my Fw800 port is fried)

Show: Today's Messages :: Show Polls :: Message Navigator

I think my fw 800 port maybe fried [message #86466]

Sat, 10 December 2016 01:09

Mattj
Messages: 3
Registered: December 2016
Location: Australia

Junior Member

Hey guys - my trusty 2882 is currently not working and it's a weird problem.
I upgraded (my hdd died along with a bunch of work - yay!) I was happy on mountain lion but had to go to Sierra..
So my 2882 is powered by the fw bus but isn't showing in core audio. I've also tried hdd on this fw port and they don't mount but provided some power as I can hear the disc spinning.
So I've done every conceivable reset (smc ect) changed cables ect but the point of failure appears to be the physical port - looks like some of the puns may have bent (as it's partially working obviously by providing power)

So I guess the question is can I go via thunderbolt with the appropriate connectors? As far as I can see it will work.

Another case of please please release the 3D card! Smile

Report message to a moderator

Re: I think my fw 800 port maybe fried [message #86467 is a reply to message #86466]

Sat, 10 December 2016 01:11

Mattj
Messages: 3
Registered: December 2016
Location: Australia

Junior Member

Oh the other weird but is it looks like it's being seen from mio console - it's offline. Shows my serial but that's it's a +dsp box which it isn't

Report message to a moderator

Re: I think my fw 800 port maybe fried [message #86468 is a reply to message #86467]

Sat, 10 December 2016 15:01

Mattj
Messages: 3
Registered: December 2016
Location: Australia

Junior Member

No one?

Report message to a moderator

Re: I think my fw 800 port maybe fried [message #86469 is a reply to message #86468]

Sat, 10 December 2016 15:50

bj
Messages: 621
Registered: July 2011

Senior Member
Administrator

If it is offline, then it is not being seen by MIO Console.

If the computer does not see any devices attached to the FW port, it does sound like it is damaged. Usually if this is the case, FireWire will not show up in Apple System Profiler either.

You can use a Thunderbolt to FW adapter and that will give you a functioning Firewire port for the short term...

Report message to a moderator

Previous Topic:	Lost ULN-2 connection with Mac Pro 5,1 (edited)
Next Topic:	ULN-2 hangs system periodically

Goto Forum:

-=] Back to Top [=-

[

]

Current Time: Sat Jun 03 06:33:37 EDT 2023