Metric Halo Discussion Forum
The place to talk MH!

Home   Search      Help    Register    Login
Home » Hardware » Interfaces » MIO interfacing with Dante network (Dante connection methods)
MIO interfacing with Dante network [message #88153] Tue, 02 November 2021 17:05 Go to next message
grifftone
Messages: 6
Registered: August 2019
Location: San Diego, Ca
Junior Member
I wish to connect my 3D-enabled LIO-8, ULN-8, and forthcoming ULN-8 mk4 devices into a Dante system at 96k.
What is the best known way to do connect with Dante (preferably staying in the digital domain) with minimal latency ?
Thanks !

Griff

MHLink 2.1.03
Mac 10.14
Logic Pro 10.5
Yamaha DM2000 console with Aviom 16/0-Y1 cards
Aviom D-800, and A-360 mixers
Re: MIO interfacing with Dante network [message #88197 is a reply to message #88153] Mon, 10 January 2022 16:01 Go to previous messageGo to next message
gantbd is currently offline  gantbd
Messages: 2
Registered: January 2022
Junior Member
Without direct AES67 or Dante support, your best bet will be to look at some of the Focusrite RedNet or RME options for accepting the digital outputs from your MIO boxes. Audinate also has the AVIO AES module, but it is only 2 channels. There may be others.

You would still need to use FW/USB/MHLink to control the units with MIOConsole.

I have done some minimal testing, and can confirm that Dante and MHLink can exist happily on the same network, though (IMO) an all in solution (e.g. MIOConsole over Dante via edge card) would be ideal.
Re: MIO interfacing with Dante network [message #88488 is a reply to message #88197] Mon, 27 February 2023 03:03 Go to previous message
wonshu is currently offline  wonshu
Messages: 3
Registered: May 2020
Junior Member
Any news on this?

I would also like to feed signal from an ULN-8 to the Behringer personal monitoring without an additional DA/AD conversion.
Previous Topic: Metric Halo Mobile I/O ULN2 Expanded 2D - MAC M1 - VENTURA
Next Topic: Analog summing with 1 LIO-8
Goto Forum:
  

[ PDF ]

Current Time: Sat Jun 03 07:16:08 EDT 2023