|
|
|
|
|
|
Re: Intermittent - sound from movies on Twitter doesn't go out interface [message #87044 is a reply to message #86806] |
Sun, 24 March 2019 16:02   |
VIYATSIATA
Messages: 4 Registered: March 2019 Location: FRANCE
|
Junior Member |
|
|
bj wrote on Thu, 27 September 2018 14:54So this is on 2d? It doesn't go out at all, or it cuts in and out?
If it doesn't go out at all, it is probably the speaker setting in AMS (Audio Midi setup). You need to go into AMS and make sure that the outputs are routed correctly for Mono, Stereo and Surround Stereo.
The AMS speaker setup seems to be right - it's the default. I don't have a surround setup, however I do have three sets of speakers being addressed through separate output pairs in Monitor Control. I'd say that's a culprit if it hadn't been working perfectly for 15 years in every other situation. Smile
[Updated on: Sun, 24 March 2019 16:04] by Moderator Report message to a moderator
|
|
|
|
|
|
|
|
|
|
Re: Intermittent - sound from movies on Twitter doesn't go out interface [message #87148 is a reply to message #87044] |
Sun, 12 May 2019 09:58   |
RAILITY
Messages: 5 Registered: May 2019 Location: france
|
Junior Member |
|
|
VIYATSIATA wrote on Sun, 24 March 2019 16:02bj wrote on Thu, 27 September 2018 14:54So this is on 2d? It doesn't go out at all, or it cuts in and out?
If it doesn't go out at all, it is probably the speaker setting in AMS (Audio Midi setup). You need to go into AMS and make sure that the outputs are routed correctly for Mono, Stereo and Surround Stereo.
The AMS speaker setup seems to be right - it's the default. I don't have a surround setup, however I do have three sets of speakers being addressed through separate output pairs in Monitor Control. I'd say that's a culprit if it hadn't been working perfectly for 15 years in every other situation. Smile
If you are going to be getting the audio from the Apple TV over Optical, you need to set the ULN-2 to clock from the optical input; click the clock icon in the sidebar, and then select "ADAT 1-8" as the source. The ULN-2 needs to have the same clock as the source; since the ATV doesn't support external clock, you will need to slave the ULN-2 to the ATV.
|
|
|
Re: Intermittent - sound from movies on Twitter doesn't go out interface [message #87149 is a reply to message #87148] |
Sun, 12 May 2019 18:11  |
nickbatz
Messages: 16 Registered: September 2018 Location: Los Angeles
|
Junior Member |
|
|
If that reply is for me, I'm not trying to get it from an Apple TV over optical, I'm routing the built-in audio out the 2882.
it works fine if I send it out HDMI to the TV I use as my second monitor, with the internal speakers... it's just the MH driver that loses contact.
And I'm not blaming MH for that, because they're on to the software for the updated hardware. After all, the interface is pushing 20 years old, and it's still great.
|
|
|