MIO interfacing with Dante network [message #88153] |
Tue, 02 November 2021 17:05  |
grifftone
Messages: 6 Registered: August 2019 Location: San Diego, Ca
|
Junior Member |
|
|
I wish to connect my 3D-enabled LIO-8, ULN-8, and forthcoming ULN-8 mk4 devices into a Dante system at 96k.
What is the best known way to do connect with Dante (preferably staying in the digital domain) with minimal latency ?
Thanks !
Griff
MHLink 2.1.03
Mac 10.14
Logic Pro 10.5
Yamaha DM2000 console with Aviom 16/0-Y1 cards
Aviom D-800, and A-360 mixers
|
|
|
Re: MIO interfacing with Dante network [message #88197 is a reply to message #88153] |
Mon, 10 January 2022 16:01  |
gantbd
Messages: 2 Registered: January 2022
|
Junior Member |
|
|
Without direct AES67 or Dante support, your best bet will be to look at some of the Focusrite RedNet or RME options for accepting the digital outputs from your MIO boxes. Audinate also has the AVIO AES module, but it is only 2 channels. There may be others.
You would still need to use FW/USB/MHLink to control the units with MIOConsole.
I have done some minimal testing, and can confirm that Dante and MHLink can exist happily on the same network, though (IMO) an all in solution (e.g. MIOConsole over Dante via edge card) would be ideal.
|
|
|