Metric Halo Discussion Forum: Interfaces » LIO-8 mk IV AES/EBU Problem

LIO-8 mk IV AES/EBU Problem [message #88251]

Thu, 07 April 2022 01:48

munky16
Messages: 6
Registered: April 2022
Location: China

Junior Member

I add an extra 8in/outs AES/EBU Edge card to connect my 12 Genelec speakers full digitally for 7.1.4 dolby atoms set up. I am using Inter Macbook pro with MAC OS 12.3, connect the unit via ethernet cable with a gigabyte usb-c adapter.

It works great, but occasionally, the AES/EBU ch 5 and 6 no signal come out.

The Genelec 8340 has the digital signal detection, when it connect correctly, the green led light will show up, if not, the light is blinking red.

I have checked and tested all the cable connections, xlr conncetors, DB25 connectors, swap the DB25 connectors, cross re-routed host channels, double check the monitor sources ,double check the Genelec GLM settings, and even rest the speaker to the factory setting. The problem is still there. when I play back the music through these two channels, the meter is shown inside the MIOconsole3D mixer.

After, I select LIO-8 as the main system ouput device, and did the speaker configuration to test all the channels, only these two channel are silence.

It seems the problem just the digital AES/EBU ch 5/6 themselves.

Is that a bug? or un-correctly setup?
index.php?t=getfile&id=230&private=0

Attachment: Screen Shot 2022-04-07 at 13.44.04.png
(Size: 69.27KB, Downloaded 401 times)
Attachment: Screen Shot 2022-04-07 at 13.44.32.png
(Size: 85.68KB, Downloaded 479 times)
Attachment: Screen Shot 2022-04-07 at 13.45.21.png
(Size: 22.70KB, Downloaded 403 times)
Attachment: Screen Shot 2022-04-07 at 13.46.27.png
(Size: 215.47KB, Downloaded 477 times)

Report message to a moderator