Metric Halo Discussion Forum: Interfaces » ULN-8: using Mic-Inputs for +4db Line

Re: ULN-8: using Mic-Inputs for +4db Line - Instruments (?) [message #86929 is a reply to message #86841]

Wed, 16 January 2019 06:25

lbachir2000
Messages: 1
Registered: January 2019

Junior Member

Torsten Lang wrote on Wed, 31 October 2018 19:50

I also have a question about this. Can you tell me what the technical difference is between the Mic and the Instrument Input? Because in the manual it says both have 200k. I always thought the instrument input would have a higher impedance than the others. Also when going with guitar trough a passive DI into the 2882, should I still select intrument input or what would be best? As far as I know high impedance sources when split passively need to be connected to high impedance inputs, right?

I likewise have an inquiry concerning this. Would you be able to reveal to me what the specialized distinction is between the Mic and the Instrument Input? Since in the manual it says both have 200k. I generally thought the instrument information would have a higher impedance than the others. Additionally while running with guitar trough a uninvolved DI into the 2882, would it be a good idea for me to in any case select intrument input or what might be ideal? To the extent I realize high impedance sources when part latently should be associated with high impedance inputs, isn't that so?

Report message to a moderator