| Rails |
| Analog Rails (low power) |
±9.9 Volts |
| Analog Rails (high power) |
±12.6 Volts |
| Maximum I/O Levels (Balanced) |
| Peak Line Output @ 0 dBFS (no jumper/low power) |
+18.5 dBu |
| Peak Line Output @ 0 dBFS (output jumper/low power) |
+22.0 dBu |
| Peak Line Output @ 0 dBFS (output jumper/high power) |
+24.5 dBu |
| Analog Send Max Output |
+21.5 dBu |
| Line In Max Input |
+24.5 dBu |
| Output Impedance |
5 Ω |
| Monitor Controller |
| Nominal FS output (Balanced) Output Jumper Off |
-19.0 dBu |
| Nominal FS output (Balanced) Output Jumper On |
-12.0 dBu |
| Maximum Output |
Same as Line |
| Gain Range |
-96 dB to +30 dB |
| Gain Precision |
±0.05 dB |
| Gain Step |
0.5 dB |
| Line Input + ADC |
| Input Impedance |
10 kΩ |
| Dynamic Range (-60 dB, flat 0-22.05 kHz, typ) |
115 dB |
| Dynamic Range (-60 dB, A-weighted, typ) |
118 dB |
| Noise Floor (flat 0-22.05 kHz, typ) |
115 dB |
| Noise Floor (A-weighted, typ) |
117.9 dB |
| THD D/A/A/D loop @ -12 dBFS |
0.0005 % |
| THD D/A/A/D loop @ -0 dBFS |
0.0015 % |
| Crosstalk @ 1kHz |
-127 dB |
| IMD 1k component (19 kHz/20kHz @ +8dBu) |
-104 dBu |
| Gain Range |
-12 dB to +31.5 dB |
| Gain Precision |
±0.05 dB |
| Gain Step |
0.5 dB |
| Line Input + ADC Frequency Response |
| +0/-0.1dB @ fs = 44100 Hz |
5.7 Hz - 20.5 kHz |
| +0/-1.0dB @ fs = 44100 Hz |
1.8 Hz - 21.0 kHz |
| +0/-0.1dB @ fs = 96000 Hz |
5.7 Hz - 43.9 kHz |
| +0/-1.0dB @ fs = 96000 Hz |
1.8 Hz - 45.4 kHz |
| +0/-0.1dB @ fs = 192000 Hz |
5.7 Hz - 42.1 kHz |
| +0/-1.0dB @ fs = 192000 Hz |
1.8 Hz - 64.7 kHz |
| 5° low-end in-channel phase deviation point |
10.7 Hz |
| Interchannel phase 0 Hz - 20 kHz |
< ±0.05° |
| Crosstalk from SMPTE Input |
< -142 dB |
| Input Processing |
| M/S Decode |
Instantiable |
| Parameteric EQ |
Instantiable |
| Dynamics |
Instantiable |
| Character |
Instantiable |
| Reverb |
Instantiable |
| Delay |
Instantiable |
| Output Processing |
| M/S Encode |
Instantiable |
| Parameteric EQ |
Instantiable |
| Dynamics |
Instantiable |
| Character |
Instantiable |
| Reverb |
Instantiable |
| Dither |
Instantiable |
| Mix Foldown |
Instantiable |
| Front Panel |
| Indicator LEDs (Bicolor) |
495 |
| Meters |
16 |
| Segments per Meter |
15 |
| Channel Encoder Knobs |
8 |
| Encoders Have Shaft Push Buttoms |
Yes |
| Monitor Controller Encoder Knobs |
1 |
| Monitor Controller Mute |
Yes |
| Monitor Controller Dim |
Yes |
| Indicators Per Encoder |
16 |
| Sample Rate Indicators |
6 |
| Clock Source Indicators |
4 |
| AES Clock Source Indicators |
4 |
| AES Lock Indicators |
4 |
| AES Input Signal Indicators |
4 |
| AES Output Signal Indicators |
4 |
| System Lock Indicator |
1 |
| Firewire Indicator |
1 |
| Front Panel Modes |
14 |
| Headphone Output (Dedicated DAC) |
TRS Stereo |
| DI Inputs (2) |
TRS Balanced |
| DI Input Impedance |
10 MΩ |
| DI Input Fixed Gain (Jumper Selectable) |
0/10/20 dB |
| DI Input Variable Gain |
-12 dB to 31.5 dB |
| Power Switch (Jumper Defeatable) |
Toggle |
| Back Panel |
| MIDI Connectors (In and Out) |
5-Pin DIN |
| SMPTE Connectors (In and Out) |
Balanced TRS |
| Word Clock Connectors (In and Out) |
75Ω BNC |
| AES Connector (8 Channels In and Out) |
DB-25 |
| AES Connector Pinout |
Tascam/Digidesign Digital |
| Line Input Connector (8 Channels) |
DB-25 |
| Line Input Pinout |
Tascam/Digidesign Analog |
| Send Output Connector (8 Channels) |
DB-25 |
| Send Output Pinout |
Tascam/Digidesign Analog |
| Line/Monitor Output Connector (8 Channels) |
DB-25 |
| Line/Monitor Output Pinout |
Tascam/Digidesign Analog |
| Line/Monitor Mult Output Connectors (Analog 1/2) |
TRS Balanced |
| FireWire Connectors (2) |
1394a 6-Pin |
| Power (Unswitched) |
2.1mm Coaxial |
| Power (Switched) |
4-Pin XLR |
| Security Slot |
Kensignton |
| Software |
| Driver |
CoreAudio Mac OS X |
| Mac OS X |
10.3.9 or newer |
| Architectures |
PPC, Intel |
| MIO Console |
Included |
| Record Panel |
Included |
| LTC Decoder |
Included |
| Mixer |
Included |
| +DSP License |
Optional |
| Power |
| Voltage |
14v - 28v |
| Power |
24 Watts |
| FireWire Bus Powerable |
No |
| Passes FireWire Bus Power |
Yes |
| Supplies FireWire Bus Power |
No |
| External Supply (Input) |
I00-240VAC |
| External Supply (Max Input Current) |
1.2 A |
| External Supply (Output) |
24 VDC |
| External Supply (Max Output Current) |
2.0 A |
| External Supply Connector |
4-Pin XLR |
| Case |
| Material |
Powder Coated Aluminum |
| Fasteners |
3mm Phillips Head |
| Weight |
6 lbs |
| Weight |
2.7 kg |
| Dimensions |
17" x 13" x 1.72" |
| Dimensions |
432 x 330 x 44 mm |
| Rack Ears (included) |
Powder Coated Steel |
| Rear Rack Mounts |
Available |
